LAS VEGAS AUTOMOTIVE MUD FLAP INSTALLATION

Automotive Mud Flap Installation At Mobile Auto Truck Repair Las Vegas

Automotive Mud Flap Installation Service near Las Vegas: Adding mud flaps to your car, truck, SUV or CUV can be easy with no drill mud flaps.  But what does no drill really mean?  It means installation without having to drill new holes into your vehicle. There are a few mud flap brands now offering mud flaps with easy installation. This means you don’t have to drill into the steel of your vehicle to attach your new auto accessory.

Do you need mud flaps on your car?

Any experienced driver will tell you driving in the rain without mud flaps may be dangerous, especially on long journeys. But why put mud flaps on a city car?

First of all, without the mud flaps all dirt and stones will fly directly into the car behind you. This can cause serious problems in the road. For example, the driver with a dirty windshield may not notice your stop lights and brake too late. But this is just one of the reasons why you would want to install mud flaps.

Everything that comes up from underneath your rear wheels also leaves a thick film on your car body and rear window. Sometimes it gets so bad even the wiper is of no use. The mud from the front wheels ends up on the windows, door handles and doorsteps, from where it can easily get on the driver’s and passenger’s hands and clothes. But that’s not all.

The flow of sand, water and stones can rub the paint and primer off the underside of your car body. That is why these spots corrode quickly. Of course, prevention is better than cure, so installing mud flaps is cheaper than restoring the factory paint.

Mud flaps are also useful in winter, as they help prevent snow build-up on the doorsteps and bumper. The mass of snow and road salt will stay on the mud flaps, rather than on the wheel arches.

The easiest way to install mud flaps!

Automotive Mud Flap Installation Service near Las Vegas: Mud flaps are installed easily on every car model, as long as you have them. Our company sells mud flaps you can purchase online. We sell mud flaps for trucks and cars.

• DAF mud flaps
• Fiat mud flaps
• Iveco mud flaps
• MAN mud flaps
• Mercedes mud flaps
• Renault mud flaps
• Scania mud flaps
• Volkswagen mud flaps
• Volvo mud flaps
• Also, mud flaps for trailers.

Welcome to our online store and have a safe trip!

How to Install Mud Flaps

Mud flaps or mud guards can be used to minimize the amount of spray, or water, that a car, truck, or SUV produces while driving in wet, muddy, or rainy conditions. Slightly different than spray guard, a mud flap is a longer, wider device commonly made of rubber or composites that can be used on any type of vehicle.

Installing no-drill mud flaps on a car

Automotive Mud Flap Installation Service near Las Vegas: Installing mud flaps commonly can be done in one of two ways, either “no-drill” or requiring a drill for some necessary bolt holes.

While it is recommended to follow the instructions for your specific make and model of mud flap, general steps for installing a “no-drill” mud flaps are as follows:

Step 1: Clean the wheel area. Clean the area where the mud flaps will be installed.

Step 2: Create space between the tire and wheel well. Turn the front wheels to the left fully for the most clearance between the tire and wheel well.

Step 3: Check for placement. Test that the flaps will work for your vehicle by holding them up and comparing them to the shape and fit of the space available and check for a “RH” or “LH” mark for proper placement.

Step 4: Locate the holes. Your vehicle should have holes drilled into the wheel well for these mud flaps to work. Locate these holes and remove the screws that are currently in place.

Step 5: Put flaps into place. Move mud flaps into place and reinstall screws into the holes in the wheel well to install mud flaps, without fully tightening.

Step 6: Tighten the screws. Adjust placement and angle of mud flaps and fully tighten screws.

Step 7: Install any extras. Install any additional screws, nuts, or bolts that may have come with the mud flaps.

Installing mud flaps that need to be drilled

Automotive Mud Flap Installation Service near Las Vegas: To install mud flaps that require holes drilled into the vehicle, the following general steps will walk you through the process:

Step 1: Clean the wheel area. Clean the area where the mud flaps will be installed.

Step 2. Create space between the tire and wheel well. Turn the front wheels to the left fully for the most clearance between the tire and wheel well.

Step 3: Check for placement. Test that the flaps will work for your vehicle by holding them up and comparing them to the shape and fit of the space available and check for a “RH” or “LH” mark for proper placement.

Step 4: Mark where to drill the holes. If your vehicle does not have the necessary factory drilled into the wheel well for your mud flaps to work, use the mud flaps as a template and clearly mark where the drill holes are needed.

Step 5: Drill the holes. Drill the holes based on the template you created.

Step 6: Install the flaps. Move mud flaps into place and install screws, nuts, and bolts into the holes in the wheel well to install mud flaps, without fully tightening.

Step 7: Tighten the screws. Adjust placement and angle of mud flaps and the fully tighten screws.

Again, it is highly recommended to locate installation instructions specific to the mud flaps you are installing on your vehicle; however, if it is not possible, the information above can be of help.

If you have any questions about mounting or installing mud flaps on your vehicle, ask a mechanic for help on how to do so.